TM 10-4510-209-13&P
0057 00
8. Check for continuity between the load terminals (9). There should be no continuity.
9. Replace a pressure switch (6) that fails these tests.
10. Install the switch cover (5).
11. Install the pump cover (4), and retain with screws.
12. Connect the water pump power cord (2) to the receptacle (3), set the water heater circuit breaker (1)
to ON position, and operate IAW instructions given in WP 0009 00. Monitor for normal operation.
1
3
4
2
6
5
8
9
8
7
0057 00-2
