TM 10-8400-201-23
11-3. IDENTIFICATION AND DESCRIPTION-Continued
The rocket fuel handlers' hood is made of cotton airplane cloth or nylon with an Impermeable resin modified butyl-rubber
coating. The hood is issued In one size only. It consists of two tie tapes per eyepiece, a snout with a tie tape, and
adjustable shoulder strap with snap fasteners.
(3) Boot, knee, rubber, black, non-skid (figure 11-1).
NSN
SIZES
SPECIFICATION
8430-00-262-8252
5
FED. SPEC. ZZ-B-530
8430-00-262-8253
6
FED. SPEC. ZZ-B-530
8430-00-262-8254
7
FED. SPEC. ZZ-B-530
8430-00-262-8255
8
FED. SPEC. ZZ-B-530
8430-00-262-8256
9
FED. SPEC. ZZ-B-530
8430-00-262-8257
10
FED. SPEC. ZZ-B-530
8430-00-262-8258
11
FED. SPEC. ZZ-B-530
8430-00-262-8259
12
FED. SPEC. ZZ-B-530
8430-00-262-8260
13
FED. SPEC. ZZ-B-530
8430-00-262-8261
14
FED. SPEC. ZZ-B-530
8430-00-262-8278
15
FED. SPEC. ZZ-B-530
The boots are made of plain butyl rubber and can not withstand the effects of oxidizers and fuels. However, they are
sufficiently thick to withstand some penetration. The boots are Issued in sizes 5 through 15.
b.
Clothing, Protective, Rocket Fuel Handlers' Ensemble (Lmited Protection)
(1) Coveralls, rocket fuel handlers' (fig. 11-2).
NSN
SIZES
SPECIFICATION
8415-00-753-6208
Medium
MIL-C-43082
8415-00-753-6209
Large
MIL-C-43082
The coveralls are made of cotton airplane cloth or nylon with an impermeable resin modified butyl rubber coating and are
issued In sizes medium and large The sleeves are fitted with tapered plastic cones and wristlets to provide an airtight fit
for the gray gloves The coveralls are constructed with an open back and legs. The coveralls are fitted to the wearer and
secured by use of the snap fasteners at the neckband, a snap fastener on the elastic strap at the middle of the back, and
the elastic straps at the crotch and the legs
(2) Hood, rocket fuel handlers' (fig. 11-2)
11-4
