TM 10-8400-201-23
11-3. IDENTIFICATION AND DESCRIPTION-Continued
NSN
CLASS
SPECIFICATION
8415-00-753-6211
1
MIL-H-43079
8415-00-753-6210
2
MIL-H-43079
The rocket fuel handler's hood Is made of either cotton airplane or nylon twill cloth with an impermeable resin modified
butyl rubber coating.
(3) Knee boot. The knee boot for the limited protection ensemble is the same as the boot In a(3) above.
c.
Clothing, Protective, Toxicological Agents' Ensemble
(1) Coveralls, toxicological agents' (fig. 11-3).
NSN
SIZE
SPECIFICATION
8415-00-099-6962
Small
MIL-C-2181
8415-00-099-6968
Medium
MI L-C-2181
8415-00-099-6970
Large
MIL-C-2181
8415-00-099-2535
X-Large
MIL-C-2181
The coveralls are made of either cotton airplane or nylon twill cloth with an impermeable butyl rubber coating and are
Issued In sizes small, medium, large and x-large.
The coveralls are constructed with the gusset and a keeper, and a slide fastener which is covered by a cover flap There
are two collar adjusting straps. The sleeves have double cuffs and snap fasteners. The coveralls have an adjustable
belt and the leg cuffs have an elastic strap with snap fasteners.
(2) Hood, gas mask, toxicological agents' protective (fig. 11-3)
NSN
SPECIFICATION
8415-00-261-6690
MIL-H-12225
The protective gas mask hood is made of cotton or nylon coated on both sides with butyl rubber and is issued in one size
only. It is designed for semipermanent mounting on a protective mask (hoseless type) or hose type mask so that the
combination can be used as a positive pressure leakproof unit The hood has three adjustable openings, with attached tie
tapes, one for each mask eyepiece and the snout Its lower portion rests on the wearer's shoulders as a shawl. Sewed
seams are covered by butyl-rubbercoated tape. There is an inner neckpiece and an outer neckpiece which falls over the
collar of the protective coveralls. The hood is provided with three small loops to which the hood cooling cover is tied The
hood outer neckpiece is held in place on the wearer's shoulders by two adjustable straps which pass under the arms and
are secured in front by snap fasteners. A draw cord Is provided on the Inner neckpiece to adjust the fitting of the hood at
the neck.
11-5
