2-11.D. M9 MULTIPURPOSE
SCABBARD BODY ASSEMBLY
This task covers:
a. Inspection
b. Disassembly
c. Repair
INITIAL SETUP
Tools and Special Tools
TM 9-1005-237-23&P
BAYONET SYSTEM--MAINTENANCE INSTRUCETIONS (Cont).
d. Clean/lubricate
e. Reassembly
References
Small arms repairman tool kit (app B)
Materials/Parts
Brush (item 2, app D)
CLP (item 3, app D)
Dry cleaning solvent (item 5, app D)
LSA (item 10, app D)
Rubber gloves (item 7, app D)
Silicone adhesive (item 13, app D)
Wash pan (item 11, app D)
Appendix B
Appendix C
Appendix D
Equipment Condition
bayonet-knife is removed from
scabbard, scabbard body assembly
is separately from attaching as-
sembly scabbard end and attach-
ing assembly load bearing end.
Wiping rag (item 12,app D)
INSPECTION
1. Visually inspect scabbard body assembly (1) for cracks. If cracked more
1/2 inch, replace scabbard body assembly.
2. Inspect two socket head screws (2) for damage. If defective or damaged,
replace.
than
3. Inspect cutter assembly (3) for breaks and cracks. If cutter assembly is
broken or cracked, evacuate to D.S. Maintenance.
2-37
