TM 9-1005-237-23&P
2-11.D. M9 MULTIPURPOSE BAYONET SYSTEM--MAINTENANCE INSTRUCTIONS (Cont).
SCABBARD BODY ASSEMBLY (Cont)
CLEAN/LUBRICATE
1. Clean the scabbard body assembly with wiping rag (item 12, app D).
NOTE
Refer to paragraph 2-4 for deciding which lubricant to use.
Do not apply lubricant until after sharpening stone has been
replaced, if it was removed.
2. Wipe metal parts of scabbard body assembly with wiping rag (item 12, app D)
and apply a light coat of lubricant.
REASSEMBLY
CAUTION
Two different lengths of socket head screws are used on the
scabbard. When replacing be sure to replace with the correct
length socket head screw. Use the long screws to attach the
cutter plate and the short screws to attach the attaching
assembly, scabbard end.
Attach cutter assembly (1) using two socket head screws (2) to scabbard body
assembly (3).
2-40
