Table 1. Washer Troubleshooting Procedure for Containerized Batch Laundry Continued.
TEST OR INSPECTION
Reconnect pump plug to
3. "Empty" Error Message
Ensure pump is plugged into
receptacle (Figure 5, Item 1).
Ensure WTS transfer tank sump
Check circuit breaker No. 6 (Figure 5,
pump circuit breaker is ON, and
pump is functioning.
Ensure CBL is set up IAW TM
Check valve setup from WTS transfer
tank (Figure 6, Item 3).
Remove sump pump and clear
Inspect sump pump (Figure 6, Item 4)
sump pump intake of
Replace inoperative sump pump
Test sump pump (Figure 6, Item 4) for
Maintain washer main drain
Check washer main drain valve
valve IAW procedures in WP
(Figure 6, Item 5).
If further corrective action is
required, notify direct support
Figure 5. Check Pump and Circuit Breaker.