Replace the Internal Fuel Hoses
Ensure fuel is contained and not allowed to spill or spray into the CBL. Failure to observe
safety precautions may result in a fire, with the possibility of serious injury or death to
1. Disconnect power by switching circuit breaker No. 22 to OFF.
2. Tag and disconnect hoses (Figure 11, Item 19) from fuel pump and fuel fittings.
3. Install replacement hose set (Figure 11, Item 19) as tagged, and tighten fittings.
4. Connect power, bleed fuel pump, and monitor for normal operation.
Figure 11. Replace the Fuel Hoses.