TB 10-8400-252-23
6. Coveralls.
a. Coveralls, Cold Weather, Mechanic's, OG 106, Specification MIL-C-41833.
Finished Measurements (In Inches)
Tolerance
Sizes
Small
Medium
Large
Plus
Minus
1/2 back1
17
18
19
1
1
1/2 waist1
21
22
23
1
1
Outseam of sleeve1
24
24
24
3/4
3/4
Inseam of trouser1
28
30
30
3/4
3/4
1
1/2back-Measured across back from back arm seam to back arm seam of sleeve with pleats closed.
2
1/2 waist-With the waist stretched and slide fastener closed, measure from side seam to side seam at waist
3
Outseam of sleeve-Measure from bottom of sleeve to edge of biswing pleat on back.
4
nseam of leg-Measure from crotch joining seam to bottom of leg.
b. Coveralls, Cooling, Rocket Fuel Handler's, Specification MIL-C-1252.
Finished Measurements (In Inches)
1
1/2 chest
28 1
Sleeve2
13 1
3
Trouser inseam
17 1
1
One-half chest measurement taken with front closed and smoothed out, across front at base of armholes, from side fold to side fold.
2
Sleeve inseam measured from base of armhole. along the inseam, to the bottom of sleeve.
3
Trouser inseam measured from crotch seam, along inseam to bottom of leg.
c. Coveralls, Combat Vehicle, Crewman, Cold Weather, Specification LP/P DES 31-68.
Finished Measurements (In Inches)
Short
Regular
Long
Tolerance
1
Half chest
X-Small
21
21
21
1/2
Small
23
23
23
Medium
25
25
25
Large
27
27
27
X-Large
29
29
29
2
Sleeve length
X-Small
18 1/2
19 1/2
20 1/2
1/2
Small
18 1/2
19 1/2
20 1/2
Medium
18 1/2
19 1/2
20 1/2
Large
18 1/2
19 1/2
20 1/2
X-Large
18 1/2
19 1/2
20 1/2
3
1/2 Waist (relaxed)
X-Small
16
16
16
3/4
Small
18
18
18
Medium
20
20
20
Large
22
22
22
X-Large
24
24
24
4
Inseam
X-Small
28 1/2
30 1/2
32 1/2
1/2
Small
28 1/2
30 1/2
32 1/2
Medium
28 1/2
30 1/2
32 1/2
Large
28 1/2
30 1/2
32 1/2
X-Large
28 1/2
30 1/2
32 1/2
1
Measure from folded edge to folded edge at bottom of armhole.
2
Measure from base of armhole to bottom edge of sleeve.
3
Measure from side edge to side edge between rows of waist tunnel stitching.
4
Measure from seam line at base of crotch to bottom of leg.
9
