TB 10-8400-252-23
b. Jacket, Army Aviation Crewmember, Intermediate, Specification LP/P DES 9-69.
Finished Measurements (In Inches)
Short
Medium
Long
1
Half chest
X-Small
24 1/4
24 1/4
24 1/4
Small
25 1/4
25 1/4
25 1/4
Medium
26 1/4
26 1/4
26 1/4
Large
27 1/4
27 1/4
27 1/4
X-Large
28 1/4
28 1/4
28 1/4
Back length2
X-Small
22
23
24
Small
23
24
25
Medium
24
25
26
Large
25
26
27
X-Large
26
27
28
Sleeve length3
X-Small
23
24
25
Small
23 1/2
24 1/2
25 1/2
Medium
24
25
26
Large
24 1/2
25 1/2
26 1/2
X-Large
25
26
27
1
Half chest-Jacket front closed at pit of armhole, from folded edge to folded edge.
2
Back length-Along center/back, from collar seam to bottom of waistband.
3
Sleeve length-Along center of front sleeve from top of sleeve to bottom edge of gusset.
c. Jacket, Flying, Men's, Specification MIL-J-7448.
Finished Measurements (In Inches)
1
Measurement
Size
Tolerance
Extra
Extra
Extra
Small
Medium
Large
Large
Large
Plus
Minus
Back length
21 3/4
22 1/8
22 3/4
22 3/4
23 1/4
1/2
1/2
1/2 chest
23
24 3/4
26 1/2
28 1/2
30 1/2
3/4
3/4
Sleeve inseam
15 3/4
16 1/8
16 1/4
16 3/8
16 3/8
1/2
1/2
1
NOTES
The measurement of the back length shall be taken at the center of the back from the bottom undercollar seam to the seam at the bottom above the knit.
The measurement of 1/2 chest shall be taken, with the jacket slide fastener closed, from folded edge to folded edge at the base of the armhole.
The measurement of the sleeve inseam shall be taken, along with the underarm seam, from the armhole to the seam above the knit.
d. Jacket, Flying, Men's, Type N-B, Specification MIJ-6279.
Finished Measurements (In Inches)
1
Measurement
Size
Tolerance
Extra
Extra
Extra
Small
Medium
Large
Large
Large
Plus
Minus
Back length
331/2
341/2
341/2 31/25
35361/2
1/2
1/2
1/2 chest
261/2
281/2
301/2Y
32
331/2
1/2
1/2
Sleeve inseam
181/2
181/2
19
191/2Y
191/2
1/2
1/2
1
NOTES
The measurement of the back length shall be taken at the center of the back from the bottom of the hood seam to the finished bottom of the jacket.
The measurement for the i chest shall be taken, with the slide fastener closed, from the folded edge to the folded edge at the base of the armhole.
The measurement for the sleeve Inseam shall be taken along the underarm seam from the armhole to the finished bottom.
e. Jacket, Identification, Air-to-Ground, Specification MIL-J-43470.
Finished Measurements (In Inches)
1
Breadth ............................................................
27 to 29
2
Back length . .....................................................
33 1/2
3
Sleeve length ...................................................
35 1/2
4
Front length ......................................................
22 1/2
1
With the front closure engaged measure across front at base of armhole from folded edge to folded edge.
2
Measure back seam length from neck to bottom of jacket.
3
Measure top sleeve seam from neck to bottom of sleeve
4
With the front closure engaged, measure down center front from neck to bottom of Jacket.
12
