NAVAIR 01-1A-509-4
01 September 2013
TM 1-1500-344-23-4
Table 2-1. Abrasives (Cont.)
Usable
Speciication/
On
National Stock
Unit of
Intended Use
Nomenclature
Part No.
Number
Issue
AC AV
MISCELLANEOUS HAND ABRASIVES (Cont.)
Copper Wool
A-A-1044
Removing corrosion from copper alloys,
X
Type I Class 3 (Fine)
5350-00-255-7736
LB
bronze, and brass surfaces.
Steel Wool,
A-A-1043
Removing corrosion from stainless steel
X
Stainless
Type IV Class 1
5350-00-440-5035
RO (5 LB)
surfaces. It is not effective at removing paint.
Not to be used prior to luorescent penetrant
(Rolls)
inspection.
X
Pumice Abrasive,
Removing stains or corrosion on thin metal
SS-P-821
5350-00-161-9033
LB
Powder
surfaces.
X
X
Removal of light tarnish or corrosion
A-A-132
Rectangular with beveled
Erasers, Rubber
from electrical connectors and avionics
7510-00-323-8788
DZ
ends
components.
POWERED ABRASIVES
X
X
Radial Bristle
3M No. SPA
5345-01-493-2510
CS (40)
Light corrosion/paint removal and surface
Disc, 3" Diameter
preparation on aluminum, titanium, and high-
strength steel substrates. Use with Radial
(Orange)
Bristle Disc Mandrel Assembly (see Table 3-2).
Radial Bristle
3M No. 360
5345-01-493-2514
CS (40)
Heavy corrosion/paint removal and surface
X
X
Disc, 3" Diameter
preparation on aluminum, titanium, and high-
strength steel substrates. Use with Radial
(Green)
Bristle Disc Mandrel Assembly (see Table 3-2).
Use with vacuum sanders (refer to Table 3-2)
Abrasive Paper,
Abranet Sanding Disc
X
X
Aluminum Oxide,
to remove paint or corrosion.
Screen-Type
830-DMS240HV
5345-01-521-4926
PK (250)
240 grit, 3" diameter
(Brown)
830-DMS320HV
5345-01-521-6602
PK (250)
320 grit, 3" diameter
860-DMS240HV
5345-01-521-4548
PK (250)
240 grit, 6" diameter
860-DMS320HV
5345-01-521-4541
PK (250)
320 grit, 6" diameter
834-DMS240HV
5345-01-521-4536
PK (250)
240 grit, 3" x 4" rectangle
834-DMS320HV
5345-01-521-4537
PK (250)
320 grit ,3" x 4" rectangle
837-DMS240HV
5345-01-533-0175
PK (250)
240 grit,3" x 7" rectangle
837-DMS320HV
5345-01-521-4929
PK (250)
320 grit, 3" x 7" rectangle
Use with vacuum sanders (refer to Table 3-2)
Clean Sanding
3M 735U Disc
Disc, Aluminum
to remove paint (80, 120, or 220 grit) and
Oxide/Ceramic,
corrosion (220 grit).
Multi-Hole
051141 20907 4
5345-01-615-8539
80 grit, 5" diameter
PG (250 EA)
(Purple)
051141 20909 8
5345-01-615-9704
120 grit, 5" diameter
PG (250 EA)
051141 20912 8
220 grit, 5" diameter
5345-01-615-4730
PG (250 EA)
051141 20913 5
80 grit, 6" diameter
5345-01-615-4731
PG (250 EA)
051141 20915 9
120 grit, 6" diameter
5345-01-615-4729
PG (250 EA)
051141 20918 0
220 grit, 6" diameter
5345-01-615-8538
PG (250 EA)
3M No. 5AFIN (ine grit)
Finishing Flap
5345-00-151-7936
EA
Removing mild corrosion and polishing
X
Brush, Aluminum
3M No. 5AMED (med. grit) 5345-00-157-9790
EA
surfaces. Also for mechanical removal and
feathering of paint systems. ONLY for use with
Oxide,
Non-woven,
a bench motor. For use with Mandrel No. 933 /
Maroon
934 / 935 (see Table 3-2).
(6" D x 1/2" arbor
hole)
Stackable
3M No. 048011-04188
Open Purchase
EA
Removing mild corrosion and polishing
X
Deburring Disc,
(medium grit)
surfaces. Also for mechanical removal and
feathering of paint systems. Use with a drill
High Strength,
3M No. 048011-00665
Open Purchase
EA
(very ine grit)
Aluminum Oxide,
and 3M No. 934 Mandrel (see Table 3-2).
Non-woven Nylon,
Maroon (6" D x
1/2" arbor hole)
