TM 1-1680-361-10
0005 00-2
OPERATION UNDER USUAL CONDITIONS WORK
PACKAGE - Continued
0005 00
ASSEMBLY AND PREPARATION FOR USE - Continued
Packing, Donning, and Doffing of AIRSAVE Vest and Body
Armor
As a minimum, the pockets will be packed with the items from
Table 1, Mandatory Survival Items List (Generic), in this work
package. Recommended locations for modular pockets are illustrated
in WP 0006 00, but when approved may vary depending on mission
requirements. Since it is generally difficult to reach the inside pockets
while the vest is donned, the inside pockets should be used to stow
items that are not needed for emergency egress or signaling.
AIRSAVE Donning Procedures (Type I)
NOTE
The CMU-33A/P22P-18(V) survival vest may either be
worn as a stand-alone item, or with the PRU-60A/P22P-
15 soft armor, or with the soft armor and the PRU-
61A/P22P-15 hard armor or with .50 caliber armor.
NOTE
The donning procedure for the Type I AIRSAVE
system begins with the aircrew member in a flight
suit/ABDU and boots.
