TM 1-1680-361-10
0005 00-5
OPERATION UNDER USUAL CONDITIONS WORK
PACKAGE - Continued
0005 00
ASSEMBLY AND PREPARATION FOR USE - Continued
AIRSAVE Donning Procedures (Type I) - Continued
CAUTION
It is important that the AIRSAVE leg and rear tether
straps are properly tightened and that the loose ends are
stowed to eliminate the hazard of snagging the straps
during emergency egress.
8.
Thread the leg straps through the friction adapters and adjust for
a snug fit.
9.
Attach the beaded handle to the front of the vest with six snap
fasteners.
10. If wearing the back armor plate, secure one of four snap
fasteners on the quick disconnect straps to the beaded pull
11. Attach the back armor retaining straps to the front disconnect
straps on the vest by placing the buckle of the rear straps over
the loop lock of the vest. Then push the quick disconnect strap
clip through the loop lock of the vest and fold strap over clip to
secure snap.
