TM 1-1680-361-10
0005 00-4
OPERATION UNDER USUAL CONDITIONS WORK
PACKAGE - Continued
0005 00
ASSEMBLY AND PREPARATION FOR USE - Continued
AIRSAVE Donning Procedures (Type I) - Continued
3.
Place the front hard plate into the flap at the bottom of the front
soft armor panel, making sure the handle is facing outward and
located near the top of the plate. Press the hard armor against
the soft armor panel to engage the hook and pile tape between
the two.
4.
Don the vest over the soft armor and front hard plate. Adjust the
chest strap to the left side to prevent the buckle from interfering
with the hard plate, and to obtain a more comfortable fit.
5.
Close the slide fastener to the first snap on the vest. If the hard
armor is not worn, close the slide fastener to the top.
6.
For attachment of LPU-21/P, LPU-23/P, and LPU-34/P see
NAVAIR 13-1-6.7.4/TM 1-1680-360-12.
7.
LPU-10/P is a totally separate item. Don the LPU-10/P over the
soft body armor. Adjust the chest strap to the left or right side to
prevent the buckle from being under the hard plate. Next fit the
hard plate to the hook and pile tape on the soft body armor chest
area. Don the AIRSAVE vest ensuring that LPU-10/P lobes are
pulled through each arm opening, such that they rest under each
arm.
