TM 10-3510-208-12
to personnel and property, Do not use near
open flame or excessive heat. Flash point
of solvent is 100 to 138F. (38 to 59C.).
Clean the tiedown bar with cleaning solvent,
Fed. Spec. P-D-680, and dry thoroughly.
c. Inspection and Repair.
(1) Inspect the tiedown bar for damage.
(2) Replace damaged tiedown bar,
d. Installation,
(1) Eidal Model ELT9T.
and secure to the trailer with lockwashers (7) and
bolts (6).
(b) Secure the tiedown bar (8) to the
washer-extractor with lockwashers (6), bolts (4),
and nuts (3).
(c) Secure the chain to the trailer with lock-
washers (2) and screws (1).
(2) Edro Model EP120-LTU.
and secure to trailer bed with internal-external
lockwashers (6) and bolts (5).
(b) Secure the tiedown bar (8) to the
washer-extractor frame with internal-external lock-
washers (4), bolts (3), and self-locking nuts (2).
(c) Secure chain to the washer-extractor
frame with screw (1).
4-32. Washer-Extractor Supports
a. Removal.
(1) Remove the nuts (1, fig. 4-37), lock-
washers (2) and capscrews (3) securing the upper
portion of the rear support (6) to the washer-
extractor frame.
(2) Remove the capscrews (4, fig. 4-37), and
lockwashers (5) and remove the rear support (6).
(3) Remove the other rear support in the same
manner.
NOTE
The rear supports (fig. 4-38) on the Edro Model
EP120-LTU laundry unit are secured to the trailer
bed with four (4) bolts and the Eidal Model ELT9T
are secured with two (2).
(4) Remove self-linking nuts (1, fig. 4-39),
bolts (2), and internal-external lockwashers (3)
securing front support to washer-extractor frame.
(5) Remove bolts (4) and internal-external
lockwashers (5) securing front support (6) to the
trailer bed.
(6) Remove front support (6).
1. Nut
3. Capscrew
5. Lockwasher
2. Lockwasher
4. Capscrew
6. Support
Figure 4-37. Rear washer-extractor supports,
removal and installation (Eidal Model ELT9T).
4-46
