TM 10-3510-208-12
1. Clamp
2. Wire
3. Rod
Figure 4-34. Generator ground rod, removal and installation.
b. Inspection and Repair.
c. Assembly and Installation. Install the rod (3,
(1) Inspect all parts for damage.
fig. 4-34) and wire (2)
and secure by
tightening the
(2) Repair and/or replace parts as necessary.
screws on clamp (1).
Section Xl. WASHER-EXTRACTOR TIEDOWN BAR AND SUPPORTS
4-31. Washer-Extractor Tiedown Bar
(2) Edro Model EP120-LTU
a. Removal.
chain to the washer extractor frame.
(1) Eidal Model ELT9T
(b) Remove self-locking nuts (2), bolts (3)
and internal-external lockwashers (4) securing the
upper end of the tiedown bar (7) to the washer-
(b) Remove the nuts (3), bolts (4) and lock-
extractor.
washers (5) securing the upper end of the tiedown
(c) Remove the bolts (5) and internal-
bar (8) to the washer-extractor.
(c) Remove the bolts (6) and lockwashers
(7) to the trailer bed. Remove tiedown bar.
(7) securing the tiedown bar (8) to the trailer.
4-43