TM 10-3510-208-12
Clean all metal parts with cleaning solvent, Fed.
install the connector (31), conduit (30) and con-
Spec. P-D-680 and dry thoroughly.
nector (29).
c. Inspection and Repair.
(8) Install the bushing (28), connector (27),
(1) Inspect all parts for damage.
conduit (26), connector (26), elbow (24), and
(2) Replace all damaged parts.
receptacle (23).
d. Assembly and Installation.
(9) Install the bushing (22), connector (21),
(1) Install the connectors (61 and 62, fig.
conduit {20), connector (19) and elbow (18).
4-111), conduit (63) and bushing (60) to the
(10) Install the conduit retaining straps (17)
receptacle (64).
and secure with lockwashers (16) and capscrews
(2) Install the conduit outlets (58 and 59),
(15).
conduits (51, 64 and 57) and connectors (49, 60,
(11) Install and reconnect all wiring, than
52, 53, 56 and 56).
install gaskets (2, 4, 6, 8, 10, 12 and 14) and
conduit outlet covers (1, 3, S, 7, 9, 11 and 13).
(3) Install the receptacle (48), then install the
bushing (47), connector (46), conduit (46) and
4-82. Heat Exchanger Exhaust Duct and Re-
connector (44).
tainer
(4) Install the conduit receptacle (43), then
a. Removal and Disassembly.
install the keeper (42), nipple (41), keeper (40) and
(1) Remove the exhaust duct (1, fig. 4-112).
bushing (39).
(2) Remove the nuts (2), lockwashers (3) and
(5) Install the connector (38, fig. 4-111),
capscrews (4) and remove retainer assembly (5),
conduit (37) and elbow (36).
chain (6) and retainer (7).
(6) Install the elbow (35), conduit (34) and
(3) Remove the nuts (8), lockwashers (9) and
elbow (33) .
remove the straps (10) from the retainer base (11).
(7) Install the conduit receptacle (32), then
4-156
