TM 10-3510-208-12
T S 3510-208-12/4-110
Figure 4-110. Washer and extractor, motor base guide rode, air pistons, microswitch and spring, removal and installation
.
(Edro Model EP120-LTU)
b. Cleaning.
(2) Clean other parts with dry compressed air
and a clean cloth.
c. Inspection and Repair.
Clean all parts in a well-ventilated area.
(1) Inspect all parts for damage.
Avoid inhalation of solvent fumes and
(2) Replace all damaged parts.
prolonged exposure of Skin to cleaning
d. Installation.
solvent . Wash exposed skin thoroughly.
Dry cleaning solvent (Fed. Spec. P-D-680)
(1) Refer to figure 4-110 for the Edro Model
used to dean parts is potentially dangerous
and install the washer motor base guide rods, air
to personnel and property. Do not use near
piston, microswitch and spring.
open flame or excessive heat. Flash point
(2) Refer to fire 4-100 for the Eidal Model
of solvent is 100 to 138F. (38 to 59C.).
and install the washer motor base guide rods, air
piston, microswitch and spring.
(1) clean all metal parts with cleaning
solvent, Fed. Spec. P-D-W, and dry thoroughly.
4-153
