TM 10-3510-208-34
(10) Remove the setscrew (22, fig. 6-2,
sheet 2 of 2) and remove the knob unit, then remove the
knob hub (23), rollers (24) and bushing (25) from the
knobs (26).
(11) Remove the drum assembly (27) from
the case (51).
(12) Remove the record (28) and screen
(29) from the drum.
(13) Remove the spring (30) and washer
(31) from the drum head (32), then remove the head.
(14) Remove the record lock assembly (33)
from the drum (36), then separate the record lock
(34) and handle (35).
(15) Remove screw (40), spring (41),
washer (42), then remove drive drum head (39).
(16) Remove setscrews (37) and (38), then
remove clutch hub (43) and bushing (44).
(17) Remove capscrews (48), lockwasher
(49), and remove bracket (50) from case (61).
(18) Remove screws (46), lockwashers (46),
then remove the drum drive motor (47).
Change 1
6-5
