TM 10-3510-208-34
(3) Remove the screws (1, fig. 6-2, sheet 1
of 2) and lockwashers (2) securing the formatrol assem.
bly to the control box.
b. Disassembly.
(1) Remove the lift lock (3, fig. 6-2, sheet 1
of 2) from the contact support (6).
(2) Remove the capscrews (4) and
lockwashers (5) securing the contact support (6) and
remove the finger box unit.
(3) Remove the contact support (6) and pin
(7)
(4) Remove the pin (8) and lift stud (9).
(5) Remove the finger handle (10) and
setscrew (11) and remove the finger handle (12) from
the finger box (21).
(6) Remove the washers ( 13).
(7) Remove the screw (14) and lockwasher
(15) and remove the clip (16).
(8) Remove the screws (17) and remove the
block number tape (18) from the finger box.
(9) Remove the screws (19) and remove the
finger contacts (20) from the finger box (21).
6-3
