TM 10-3510-209-10
2-7. SITE SELECTION, SETUP, AND ASSEMBLY. (CONT)
b. Set up platform as follows:
WARNING
This procedure requires at least two people for lifting various components. Failure
to observe standard lifting procedures may result in serious injury to personnel.
(1)
Remove ball locking pin (1) from workstand storage support (2) and remove front workstand
storage support by lifting up.
(2)
Remove bracket (3) and store in toolbox.
(3)
Slide washer platform (4) toward front of trailer and remove washer platform from trailer.
(4)
Remove clamp (5) from short platform (6) and dryer platform (7).
Change 1 2-33
