TM 10-3510-209-24
2-25. AIR TANK ASSEMBLY (CONT)
REMOVAL (Cont)
2.
Remove twelve screws (10) in front cover (11) of
washer base (12).
WARNING
Ensure all air pressure is released
from tank before disconnecting air
lines. Compressed air used in this
equipment
can
cause
death
or
serious
injury
if
proper
safety
precautions are not followed.
3.
Disconnect two air lines (2) and air line (3).
4.
Remove four nuts (4), lockwashers (5), flat
washers (6), and bolts (7) and remove air tank (8) from
mounting plate (9).
5.
Slip air tank through front of washer base.
INSTALLATION
1.
Install air tank (8) on mounting plate (9) and
secure with four bolts (7), flat washers (6), lockwashers
(5), and nuts (4).
2.
Connect two air lines (2) and air line (3) to air
tank (8).
3.
Close petcock (1).
4.
Install front cover (11) on washer base (12)
using twelve screws (10).
5.
Turn on power to air compressor.
Page 2-99 deleted
2-98 Change 1
