TM 10-3510-209-24
2-34. WATER HEATER BURNER HEAD AND NOZZLE ASSEMBLY (CONT)
INSTALLATION
1.
Install burner tube (9) and gasket (10) on water
heater (11) and secure with four lockwashers (8)
and nuts (7). Tighten nuts evenly.
2.
Install nozzle and electrode assembly (6) in
burner
tube
(9)
and
secure
with
three
lockwashers (5) and nuts (4).
CAUTION
The water heater burner head and
nozzle
assembly
is
a
sensitive
device. Rough handling can damage
the scanner and result in possible
failure of flame safeguard control.
3.
Connect scanner (3) to nipple (23) and tighten
firmly.
4.
Connect two ignition cables (1) to two spark
plugs (12).
5.
Connect fuel line (2) to elbow (17).
NOTE
FOLLOW-ON MAINTENANCE:
Check
water
heater
for
proper
operation (TM 10-3510-209-10).
Install
tarp
assembly
(TM 10-3510-209-10).
2-122 Change 1