TM 10-3510-209-24
2-35. WATER HEATER ELECTRIC CONTROL ASSEMBLY (CONT)
REPAIR (Cont)
(5)
Remove two nuts (8) and two washers (9) and lift ignition transformer up to clear studs (10) and pull
wires (11) out of conduit.
b.
Install new Ignition transformer (6) as follows:
(1)
Feed two wires (3) through conduit (5).
(2)
Set ignition transformer (6) in place on studs (10) and secure with two washers (9) and two nuts (8).
2-124.2 Change 1
