TM 10-3510-209-24
2-56. FIRE EXTINGUISHER
This task covers:
a. Inspection
b. Removal
c. Replacement
d. Installation
INITIAL SETUP
Tools
Materials/Parts
General mechanic's tool set
Fire extinguisher
SC 5180-90
Equipment Condition:
Personnel Required
TM 10-3510-209-10, Tarp assembly removed.
MOS 63J (1)
INSPECTION
Inspect fire extinguisher (3) for damage, missing pin (1),
and not being fully charged.
REMOVAL
1.
Unhook spring-loaded clamp (2) and remove fire
extinguisher (3) from mounting bracket (7).
2.
Remove two capscrews (4), lockwashers (5), flat
washers (6), and mounting bracket (7) from
frame assembly (8).
REPLACEMENT
Replace fire extinguisher if not fully charged or if fire
extinguisher is damaged or inoperative.
INSTALLATION
1.
Position mounting bracket (7) and secure with
two flat washers (6), lockwashers (5), and
capscrews (4).
2.
Install fire extinguisher (3) on mounting bracket
(7) and secure with spring-loaded clamp (2).
NOTE
FOLLOW-ON MAINTENANCE:
Install tarp assembly (TM 10-3510-209-10).
2-190
