TM 10-3510-209-24
3-20. WATER HEATER ELECTRIC CONTROL ASSEMBLY (CONT)
DISASSEMBLY (Cont)
4.
Tag wires connected to low water relay (8). Remove eight screws (19) securing wire lugs to terminals. Loosen
three screws (20) and raise up and remove low water relay from circuit box (3).
5.
Tag and disconnect 10 wires at output and input terminals of motor contactor (7). Refer to FIGURE 2-5. Remove
three screws (22) and washers (24). Remove motor contactor from circuit box (3).
3-94 Change 2
