TM 10-3510-209-24
3-29. WATER PUMP (CONT)
ASSEMBLY
NOTE
Align
matchmarks
for
ease
in
assembly.
1.
Install two bearings (35) and shims (34) on shaft
(33).
2.
Install shaft (33) in motor housing (27).
3.
Install end plates (32) and (31) and four bolts
(30) on shaft (33) and motor housing (27).
4.
Install impeller (29) on shaft (33) and tighten
screw (28).
5.
Install end plate (26) and four bolts (25) on
motor housing (27).
6.
Install fill plug (24) and suction port drain plug
(22) in housing (3).
7.
Install stationary seal (21) on motor shaft. Install
mechanical seal (20) on pump side of motor
adapter (6).
8.
Install motor (19), four lockwashers (18), and
nuts (17) on motor adapter (6).
3-138
