TM 10-3510-209-24
3-29. WATER PUMP (CONT)
DISASSEMBLY (Cont)
2.
Remove two machine screws (7) and vane plate
(8).
3.
Place screwdriver in slot (9) and hold motor from
turning. Remove impeller jam nut (10) from motor
shaft (11).
4.
Place screwdriver in slot (9) and hold a block of
wood on edge of impeller blade and strike sharply
with hammer. Remove impeller (12) from motor
shaft (11).
NOTE
Tag and tie seal assembly when
removed.
5.
Remove impeller shims (13), seal washer (14),
spring cup (15), and spring (16) from motor shaft
(11).
3-135
