TM 10-3510-220-24
2-24. WASHER CONTROLLER ASSEMBLY (CONT)
3. Removal of stop/run knob.
Loosen two set screws (4) and remove knob (5).
INSTALLATION
1. Installation of window.
Position new window (3) in place and secure with four screws (1) and washers (2).
2. Installation of stop/run knob.
a. Remove control console access lid.
b. Place stop/run knob (5) on shaft extension and tighten two hex head set screws (4).
c. Install control console access lid.
3. Close access cover.
2-78
