TM 10-3510-220-24
2-26. AIR COMPRESSOR
This task covers:
a. Service
b. Adjustment
c. Removal
d . Repair
e. Installation
INITIAL SETUP:
Tools
Equipment Condition
Paragraph 2-28, Pre-extraction bin removed.
General mechanic’s tool kit
NOTE
Personnel Required
Two
SERVICE and ADJUSTMENT can be per-formed
without removing pre-extraction bin.
Materials/Parts
General Safety Instructions
Pressure switch C85037 (51034)
Identification tags
(Item, 12 App C)
Thread sealing compound (Item 5,
App C)
WARNING
High voltage is present on this equipment. Do not
perform maintenance with power on. Death or
serious injury may result.
WARNING
High voltage is present on this
e q u i p m e n t .
D o n o t p e r f o rm
m a i n t e n a n c e w i t h p o w e r o n .
Death or serious injury may
result.
NOTE
SERVICE and ADJUSTMENT
can be performed with-out
removing pre-extraction bin.
1.
2.
3.
4.
5.
Remove two air filters (4) from air
compressor (1).
Remove cap (2) of each air filter (4).
Remove and discard felt filter
element (3) from each air filter (4).
Install new felt filter element (3) in
each air filter (4).
Install cap (2) on each air filter (4).
2-82
