TM 10-3510-220-24
3-12. WASHER CONTROLLER STAND
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Condition
Tools
TM 10-3510-220-10, Tarp assembly removed.
General mechanic’s tool kit
Paragraph 2-28, Pre-extraction bin removed.
Paragraph 3-11, Washer controller removed.
Paragraph 2-26, Air compressor removed.
Paragraph 3-14, Power distribution panel
removed.
General Safety Instructions
WARNING
High voltage is present on this equipment. Do
not perform maintenance with power on.
Death or serious injury may result.
REMOVAL
1.
Remove seven bolts (2), flatwashers (3), flatwashers (4), lockwashers (5) and nuts (6).
2.
Remove controller stand (1) from trailer.
INSTALLATION
1.
Install controller stand (1) on trailer.
2.
Install seven bolts (2), flatwashers (3), six flatwashers (4), seven lockwashers (5) and six nuts
(6).
3.
Perform follow-on installation.
Install power distribution panel (para 3-14).
Install air compressor (para 2-26).
Install washer controller (para 3-11).
Install pre-extraction bin (para 2-28).
Install tarp assembly (TM 10-3510-220-10)
3-40
