TM 10-3510-220-24
3-19.
WATER HEATER ELECTRIC CONTROL ASSEMBLY (CONT)
DISASSEMBLY (Cont)
8.
Tag and disconnect all wires from panel-mounted components.
9.
Remove six conduit locknuts (35) and conduit fitting (36) from circuit box (3).
10.
Remove four nuts (40), lockwashers (41), screws (42), and circuit box (3) from skid assembly (43).
11.
Remove four nuts (37), spacers (39), and mounting panel (38).
ASSEMBLY
1.
Install mounting panel (38), four spacers (39), and nuts (37) in circuit box (3).
2.
Install circuit box (3), four screws (42), lockwashers (41) and nuts (40) on skid assembly (43).
3.
Install six conduit fittings (36) and conduit locknuts (35) in circuit box (3).
4.
Connect all wires to panel-mounted components. Remove tags.
3-92C h a n g e 3
