TM 10-3510-220-24
3-19. WATER HEATER ELECTRIC CONTROL ASSEMBLY (CONT)
ASSEMBLY (Cont)
10.
Connect wires (17) to power limit
switch (1) and secure with six
screws (16). Remove tags.
Install power limit switch and
two screws (15) on circuit box (3).
Position gasket (14) and cover
plate (19) in place and secure with
four screws (18).
11.
Install receptacle (4).
a. Connect five wires (13) to rear
of receptacle (4). Remove tags.
b. Insert receptacle (4) inside
circuit box (3) and secure with
three screws (12) under
c.
receptacle cap.
Install cover plate (11) and gasket
(14) and secure with four screws (10).
12.
Perform follow-on installation.
Install tarp and dry clothes bin
assemblies (TM 10-3510-220-10).
3-96
