TM 10-3510-220-24
3-26. DRYER TUMBLER DRIVE MOTOR AND GEARBOX ASSEMBLY (CONT)
INSTALLATION
1.
Install gearbox and trunnion.
a.
b.
c.
d.
e.
f.
g.
Position trunnion (34) in place and secure
with four flatwashers (33), lockwashers
(32) and capscrews (31).
Position keeper (30) in place and
secure with two flatwashers (29) and
capscrews (28). Lockwire capscrews
(28).
Position cover (27) in place and secure
with three lockwashers (26) and
capscrews (25).
Turn adjusting screw (35) until
dryer tumbler rotates freely.
Install sprocket key (18) and chain
sprocket (15) on shaft (14) and tighten
setscrew (17) in chain sprocket.
Place drive chain (16) on chain
sprocket (15).
Install gear reduction unit (13) using four bolts
(11), lockwashers (10) and flatwashers (9).
Tighten four mounting bolts (11).
3-123
