TM 10-3510-220-24
3-26. DRYER TUMBLER DRIVE MOTOR AND GEARBOX ASSEMBLY
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Equipment Condition
Tools
TM 10-3510-220-10, Tarp assembly removed.
General mechanic’s tool kit
General Safety Instructions
Personnel Required
WARNING
Two
High voltage is present on this equipment. Do
Materials/Parts
not perform maintenance with power on.
Death or serious injury may result.
Tumbler motor 38A545161 (81137)
Tumbler gearbox 6-2-2330 (81137)
REMOVAL
1. Remove drive motor.
WARNING
High voltage is present on this equipment. Do not perform maintenance
with power on. Death or serious injury may result.
a.
Remove electrical power from the dryer.
b.
Remove two screws (6) and cover (5) for connector box (7).
NOTE
A record of wire removal is needed so that installation of wires on the
replacement motor is exactly duplicated. See Figure 4, Appendix E.
c.
Tag and disconnect electrical wires (2) from the terminals and connectors. Remove
conduit nut (3) and conduit (4) from connector box (7).
3-119
