TM 10-3510-220-24
3-28. WATER PUMP AND MOTOR ASSEMBLY (CONT)
ASSEMBLY
1.
2.
Align matchmarks for ease in assembly.
install bearing retainer (10), bearings (8)
and (11) and shim (7) on rotor shaft (9).
3.
4.
5.
6.
Install rotor (9) in motor housing (12)
and secure with two screws (15).
Connect wiring as tagged to reset
button (13) and secure with two
screws (14).
Install end plate (6) on motor
housing (12) and secure with four bolts (5).
Install fan (4) on rotor shaft (9) and
tighten screw (3).
7.
Install fan cover (2) on motor housing (12)
and secure with three screws (1).
3-135
