TM 10-3510-220-24
CHAPTER 4
GENERAL SUPPORT MAINTENANCE PROCEDURE
Section I. GENERAL
Para
Title
Page
4-1
Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
4-2
Common Tools and Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
4-3
Special tools, TMDE, and Support Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
4-4
Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
4-1.
SCOPE. This chapter contains maintenance instructions for repairing the laundry unit
components at the general support maintenance level.
4-2.
COMMON TOOLS AND EQUIPMENT. For authorized common tools and equipment, refer
to the Modified Table of Organization and Equipment (MTOE) applicable to your unit.
4-3.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT. Refer to appendix B,
Maintenance Allocation Chart, for a list of special tools, TMDE, and support equipment and TM 10-
3510-220-24P, Repair Parts and Special Tools List.
4-4.
REPAIR PARTS. Repair parts are listed and illustrated in the repair parts and special tools
list (TM 10-3510-220-24P) covering unit through intermediate general support maintenance
equipment.
Section II. GENERAL SUPPORT MAINTENANCE PROCEDURES
Para
Title
4-5
Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6
General Repair. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-7
Welding Certification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8
Welding Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
for this
Page
4-1
4-2
4-4
4-4
4-5. SCOPE. This section contains procedures that involve welding, cleaning and painting
assemblies to repair the laundry unit. General procedures to be followed in the removal, repair,
replacement, or installation of components and testing are also included. When a special procedure is
used in the removal, repair, or installation of a component, that procedure will be detailed in the
section covering the component. If no special procedure is mentioned, then standard maintenance
practices will apply.
4-1
