TM 10-3510-220-24
Table 2-2. Unit Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
29. EXCESSIVE SMOKE FROM DRYER EXHAUST. (Cont)
Step 3.
Step 4.
Step 5.
Check for dirty burner.
a.
If burner is dirty, clean burner. Refer to paragraph 2-51.
b .
If burner is clean, proceed to next step.
Check for blocked air intake screen.
a .
If blockage is found, remove blockage from air intake screen.
b.
If air intake screen is serviceable, proceed to next step.
Check for worn or broken fuel pump parts.
a .
If pump is damaged, repair or replace fuel pump. Refer to paragraph 2-46.
b .
If fuel pump is serviceable and problem persists, notify your supervisor.
30. AIR LEAKS FROM DRYER DOOR.
Step 1.
Check for loose door latch.
a .
If door latch is loose, adjustor replace door latch. Refer to paragraph 2-44.
b .
If door latch is serviceable, proceed to next step.
Step 2.
Check for bent door or hinge.
Straighten or replace door assembly. Refer to paragraph 2-44.
AIR COMPRESSOR
31. AIR COMPRESSOR DOES NOT OPERATE
Step 1.
Check for tripped main power supply and compressor circuit breaker.
a .
If breaker is tripped, turn main power supply and compressor circuit
breaker to ON. Refer to TM 10-3510-220-10.
b.
If circuit breakers are not tripped, proceed to next step.
2-37
