TM 10-3510-220-24
2-21.
WASHER ASSEMBLY (CONT)
REPAIR
1.
2.
3.
4.
NOTE
Repair consists of replacing the washer thermometer.
Remove water pump (TM 10-3510-220-10) and washer drivebelt cover (para 2-23) for easy
access to washer thermometer.
Remove three screws (2), and washers (3) securing temperature gage (4) to bracket (1).
Remove tiewraps as required.
Pull temperature probe out of thermo-well on bottom of washer. Feed temperature probe and
cable through gauge mounting bracket to remove.
5. Install new temperature gauge (4) by feeding probe and cable through gauge mounting bracket
(1) and out the bottom.
6. Install three screws (2) and washers (3) to secure gauge (4) to bracket (1).
7. Push probe (5) firmly into thermo-well (6).
8. Install tiewraps as required.
9. Install drivebelt cover (para 2-23) and water pump (TM 10-3510-220-10).
2-65
