TM 10-3510-220-24
2-21. WASHER ASSEMBLY (CONT)
ADJUSTMENT (Cont)
3.
Adjust high water fill level.
a.
b.
c.
d.
e.
WARNING
High voltage is present inside control console. Do not perform
maintenance with power on. Death or serious injury may result.
Select high water level and allow washer to fill.
Check high water level for a depth of approximately 11 inches (45.6 mm).
If level is incorrect, remove cover of control console and adjust center screw “A’ on HIGH
WATER LEVEL switch.
Drain washer.
Repeat steps (a) thru (d) until a high level of approximately 11 inches (71 mm) is reached.
2-67
