TM 10-3510-220-24
2-21.
WASHER ASSEMBLY (CONT)
A D J U S T M E NT
1.
Adjust low water fill level.
a.
b.
c.
d.
e.
WARNING
High voltage is present inside control console. Do not perform
maintenance with power on. Death or serious injury may result.
Select low water level and allow washer to fill.
Check low water level for a depth of approximately 7 inches (45.1 mm).
If level is incorrect, remove cover of control console and adjust center screw “A" on LOW
WATER LEVEL switch.
Drain washer.
Repeat steps (a) thru (d) until a low level of approximately 7 inches (47.7 mm) is reached.
2-66
