TM 10--3510--221--10
0010 00--11/12 blank
LAUNDRY ADVANCED SYSTEM OPERATION UNDER USUAL CONDITIONS
DAILY OPERATING PROCEDURES -- Continued
0010 00
DAILY OPERATING PROCEDURES -- Continued
F. System Shutdown -- Continued.
3. Monitor display (WP 0008 00, Figure 2, 6) at operator panel A, it should read:
WASH CYCLE X
SELECT CYCLE
WASH= XXX F DRY= XXX F
SELECT CYCLE, TEMP, START
MODIFY TEMPS
START CYCLE
4. Press MENU SELECTION switch (7) to toggle through available cycles until COOLDOWN CYCLE is displayed.
5. Press MENU SELECTION switch (9) to start cooldown cycle.
NOTE
A normal cooldown lasts about 30 minutes. Once a cooldown cycle starts, operation
is automatic until cycle is completed. When a continuous audible alarm sounds this
indicates the cycle is complete.
6. Wait for cycle to be completed. When audible alarm (5) sounds press SILENCE ALARM switch (5) on operator
panel A.
7. Monitor display (6), it should read:
CYCLE COMPLETE
PERFORM AFTER PMCS
8. Perform AFTER PMCS (WP 0024 00).
9. Position CONTROL POWER switch (WP 0008 00, Figure 1, 3) to OFF.
10. Position MAIN DISCONNECT switch (1) to OFF.
11. Discontinue operation of MEP--805A generator on--line (TM 9--6115--644--10) or remove external power as
required.
END OF WORK PACKAGE
