TM 10--3510--221--10
0012 00--3
LAUNDRY ADVANCED SYSTEM OPERATION UNDER USUAL CONDITIONS
PREPARATION FOR MOVEMENT -- Continued
0012 00
PREPARATION FOR MOVEMENT -- Continued
A. Drain LADS and System Shutdown -- Continued.
15. Monitor display (WP 0008 00, Figure 2, 6) at operator panel A, it should read:
WASH CYCLE X
SELECT CYCLE
WASH= XXX F DRY= XXX F
SELECT CYCLE, TEMP, START
MODIFY TEMPS
START CYCLE
EXAMINE INPUTS
16. Press MENU SELECTION switch (7) to toggle through available cycles until DRAIN CYCLE is displayed.
17. Monitor display (6) at operator panel A, it should read:
DRAIN CYCLE
SELECT CYCLE
START CYCLE
WASH= XXX F DRY= XXX F
SELECT CYCLE, TEMP, START
MODIFY TEMPS
EXAMINE INPUTS
18. Press MENU SELECTION switch (9) to start drain cycle.
NOTE
The control system will automatically perform a cooldown cycle when a drain cycle is
initiated. A normal cooldown lasts about 30 minutes. Operation is automatic until the
cooldown portion of drain cycle is complete. When a continuous audible alarm
sounds this indicates the cooldown cycle is complete.
19. Wait for cooldown cycle to be completed. When audible alarm (5) sounds press SILENCE ALARM switch (4) on
operator panel A.
20. Monitor display (6), it should read:
DRAIN CYCLE PAUSED
PERFORM AFTER PMCS
CONTINUE CYCLE
21. Perform AFTER PMCS (WP 0024 00) except when cleaning still do not add anti--foam.
22. Connect 5 ft drain hose (15) to drain port (16).
23. Connect 50 ft drain hose (17) to 5 ft drain hose (15).
24. Open drain valve (18) on side of still (19) where hose (15) is connected.
