TM 10--3510--221--10
0034 00--1/2 blank
EVAPORATIVE COOLER SERVICING
0034 00
THIS WORK PACKAGE COVERS:
Cleaning, Inspection
INITIAL SETUP:
Maintenance Level
Materials/Parts
Operator
REMOVAL
1. Slide filters (1) up and out of evaporative cooler (2).
2. Pull demister mesh (3) out of evaporative cooler (2).
3. Rinse filters (1) with water from back side until all debris is removed.
4. Rinse demister mesh (3) with water until all dirt is removed.
5. Inspect filters (1) for obvious damage. Replace if damaged.
6. Inspect demister mesh (3) for obvious damage. Replace if damaged.
1
6
2
3
4
5
INSTALLATION
1. Install demister mesh (3) between header pipe (4) and drain trough (5).
2. Slide filters (1) down into evaporative cooler (2) with direction arrow (6) visible.
END OF WORK PACKAGE
