TM 10--3510--221--10
0031 00--1/2 blank
HEAT EXCHANGER INLET SCREEN SERVICING
0031 00
THIS WORK PACKAGE COVERS:
Cleaning, Inspection
INITIAL SETUP:
Maintenance Level
Materials/Parts
Operator
CLEANING
1. Remove rear screen (1) from still condenser (2).
2. Slide side screens (3) out of tracks (4).
3. Remove tracks (5) from screens (3).
4. Rinse screens (1 and 3) with water until all debris is removed.
5. Inspect screens (1 and 3) for tears or obvious damage. Replace if torn or damaged.
6. Reinstall tracks (5) onto screens (3).
7. Slide side screens (3) into tracks (4).
8. Reinstall screen (1).
1
2
4
5
3
END OF WORK PACKAGE
