TM 10--3510--221--24
0138 00--3/4 blank
FRONT AIR BAG REPLACEMENT -- Continued
0138 00
INSTALLATION
1. Apply anti--seizing tape to threads of nipple (22).
2. Compress air bag (1) and insert between drum frame (17) and pedestal (21).
3. Install two screws (18), lock washers (19) and plate (20) to secure air bag (1) to pedestal (21).
4. Install two screws (14), lock washers (15), and flat washers (16) to secure air bag (1) to drum frame (17).
5. Thread piping (13) into air bag (1) ensuring petcock (6) is oriented as shown.
6. Connect air line (12) to air bag (1).
NOTE
Step 7 applies to right front air bag on drum B only.
7. Install access panel (10) onto ISO frame (11), then secure with eight screws (7), flat washers (8), and nuts (9).
8. Open manual valve (4).
9. Close access door (3) and secure by engaging two latches (2).
10. Use maintenance menu to test air system (WP 0010 00). After air system is pressurized audibly check for air
leaks at air bag(s) (1).
11. Perform a test laundry cycle (TM 10--3510--221--10). Verify smooth operation of drum.
END OF WORK PACKAGE
