TM 10--3510--221--24
0139 00--3/4 blank
REAR AIR BAG REPLACEMENT -- Continued
0139 00
INSTALLATION
1. Apply anti--seizing tape to threads of elbow (8).
2. Compress air bag (1) and insert between bearing frame (12) and pedestal (16).
3. Install two screws (13), lock washers (14) and plate (15) to secure air bag (1) to pedestal (16).
4. Install two screws (9), lock washers (10), and flat washers (11) to secure air bag (1) to bearing frame (12).
5. Thread elbow (8) into new air bag (1).
6. Connect air line (7) to air bag (1).
7. Open manual valve (4).
8. Close access door (3) and secure by engaging two latches (2).
9. Use maintenance menu to test air system (WP 0010 00). After air system is pressurized audibly check for air
leaks at air bag(s) (1).
10. Perform a test laundry cycle (TM 10--3510--221--10). Verify smooth operation of drum.
END OF WORK PACKAGE