TM 10--3510--221--24
0198 00--4
AIR COMPRESSOR REPLACEMENT -- Continued
0198 00
INSTALLATION
1. Apply anti--seizing tape to threads of swivel elbow (19), adapter (27), elbow (29), and relief valve (30).
2. Position new air compressor onto mounting bracket (23) then secure with four screws (40), lock washers (41),
and flat washers (42).
3. Remove two screws (35), then remove cover (36) and gasket (37) from air compressor (14).
4. Install conduit elbow (39) into air compressor (14).
5. Insert wiring and conduit (16) through conduit elbow (39) then tighten conduit nut (38).
6. Connect wires at air compressor (14) as tagged.
7. Install cover (36) and gasket (37) onto air compressor (14), then secure with two screws (35).
8. Position cover (34) onto mounting bracket (23), then secure with four screws (31), lock washers (32), and flat
washers (33),
9. Install swivel elbow (19), adapter (27), elbow (29), and relief valve (30) onto air compressor (14).
10. Connect tubes (26 and 28) at adapter (27) and elbow (29).
11. Position air compressor (14) onto frame (25) and align mounting holes with shock mounts (24).
12. Secure mount bracket (23) to shock mounts (24) with four screws (20), lock washers (21), and flat washers
(22).
13. Connect air tube (18) at swivel elbow (19).
14. Install tiedown strap (17) to secure wiring and tubing to air compressor (14).
15. Insert wiring and conduit (16) into outlet box (13) then tighten conduit nut (15).
16. Connect wires at outlet box (13) as tagged.
17. Install cover (11) and gasket (12) to outlet box (13), then secure with two screws (10).
18. Use maintenance menu to test air system (WP 0010 00). After air system is pressurized audibly check for air
leaks.
19. Close access door (7) and secure by engaging two latches (6).
END OF WORK PACKAGE
