TM 10--3510--221--24
0201 00--1
DEHYDRATOR REPLACEMENT
0201 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Tags (Item 9, WP 0271 00)
Tape, Anti--Seizing (Item 10, WP 0271 00)
Strap, Tiedown (Item 13, WP 0275 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
REMOVAL
1. Disengage two latches (1), then open access door (2).
2. Open petcock (3), allow air to vent from air tank (4), then close petcock.
3. Remove two screws (5), then remove cover (6) and gasket (7) from outlet box (8).
4. Tag and disconnect power cord (9) of dehydrator (10).
5. Loosen nut (11) on cord grip (12) then pull power cord (9) out of outlet box (8).
6. Remove tiedown straps (13) securing power cord (9) to tubing (14) and air compressor (15).
7. Disconnect tube (16) from elbow (17).
8. Disconnect tube (18) from connector (19).
9. Remove four screws (20), and flat washers (21), then remove dehydrator (10) from frame (22).
10. Unthread elbow (17) from dehydrator (10).
11. Unthread connector (19) from dehydrator (10).
12. Clean anti--seizing tape from threads of elbow (17) and connector (19).
