TM 10-3510-222-24
2-28. LOCK COVER AND LOCK.
This task covers:
a. Removal
b. Repair
c. Installation
d. Adjustment
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 2)
Materials/Parts
Connector (App C, Item 26)
Sealing Washer (App C, Item 64)
Plumbing Fixture Setting Compound
(App D, Item 20)
Tags (App D, Item 4)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
High
voltage
is
present
on
this
equipment.
Do
not
perform
maintenance with power on. Death or
serious injury may result.
a. REMOVAL
(1) Lock cover (3).
(a) Remove four screws (1) and washers (2) from lock cover (3).
(b) Remove lock cover (3) from lock (4).
(c) Tag electrical wiring (5) and remove two connectors (6).
(d) Remove nut (7), washer (8) and connector (9). Discard washer (8).
(2) Lock (4).
(a) Remove lock cover (3).
(b) Remove four screws (32) from lock (4) and remove lock.
b. REPAIR
(1) Switch (11).
(a) Remove boot (10) from switch (11).
(b) Remove switch (11) from lock cover (3).
(c) Position new switch (11) in lock cover (3).
(d) Install boot (10) on switch (11).
(2) Door Solenoid (31).
(a) Remove two nuts (28), washers (29) and screws (30).
(b) Remove nut (23), washer (24), screw (26), washer (25) from door solenoid (31) and remove bar (27).
2-72