TM 10-3510-222-24
2-29. BELT GUARD.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
High voltage is present on this equipment. Do not
perform maintenance with power on. Death or
serious injury may result.
a. REMOVAL
(1) Remove four studs (4) from guard (5).
(2) Remove guard (5) from washer (6).
b. REPAIR
(1) Stud (4).
NOTE
All four studs are identical, this procedure is for one of them.
(a) Remove nut (1), star washer (2), chain and stud (4) and screw (3) from guard (5).
(b) Install screw (3), new chain and stud (4), star washer (2) and nut (1) on guard (5).
(2) Guard (5).
(a) Remove four studs (4) from guard (5).
(b) Install four studs (4) on new guard (5).
c. INSTALLATION
(1) Position guard (5) on washer (6).
(2) Install four studs (4) on guard (5).
2-76
